Below are the equipment requirements for the Recreational (Essentials, Rec 1, Rec 2 and Rec 3) curriculum and the Technical, Trimix & Overhead (Intro to Tech, Tech 1, Tech 2, Tech 2 2 Bottle Endorsement, Trimix 1 and Overhead Protocols) curriculum.

Equipment brand is not a concern so long as it is in safe operating condition.

Rentals are available for most items, if needed.

If you have any questions regarding equipment requirements, please email Brian


RECREATIONAL EQUIPMENT REQUIREMENTS


Essentials & Rec 1 Equipment Requirements
  • Blade or Jet style fins - No split fins
  • Regulator set consisting of:

            - 5-7' longhose primary regulator
            - 22" necklace/backup regulator hose
            - 24" hp/spg hose
            - lpi hose of appropriate length for the wing's corrugated hose

  • 1 primary mask
  • 1 exposure suit
  • 1 bottom timer
  • 1 compass
  • 1 surface marker buoy (smb), pre-rigged with 100' spool

Rec 2 & Rec 3 Equipment Requirements
  • SS or aluminum backplate w/ single piece 2" webbing harness & hardware
  • Back inflate style wing - no bungeed wings, no dual inflators
  • Single cylinder of at least 80cuft
  • Regulator set consisting of:
           - 5-7' longhose primary regulator
           - 22" necklace/backup regulator hose
           - 24" hp/spg hose
           - lpi hose of appropriate length for the wing's corrugated hose
  • Blade or Jet style fins - No split fins
  • 1 primary light, HID or LED preferred 
  • 1 backup light 
  • 1 primary mask
  • 1 backup mask
  • 1 bottom timer
  • 1 compass
  • 1 exposure suit
  • Rec 3 - 1 separate drysuit inflation system
  • 1 surface marker buoy (smb)
  • 1 100' spool
  • 1 cutting device

TECHNICAL & OVERHEAD EQUIPMENT REQUIREMENTS 

Essentials of Tech Equipment Requirements
  • SS or aluminum backplate with single piece 2" webbing harness and hardware
  • 1 back inflate style wing (no bungeed wings, no dual inflators)
  • 1 set of doubles cylinders with isolation manifold, DIN valves
  • Regulator set consisting of 2 first stages and:
           - 7' longhose regulator
           - 22-24" backup/necklace regulator hose
           - 24-26" hp/spg hose
           - lpi inflator appropriate to the wing's corrugated hose
  • 1 al40 deco bottle w/ deco reg - 36" (swivel turret) or 40" (non-swivel turret) regulator hose 6" hp/spg hose
  • 1 canister style HID or LED primary light
  • At least 1 backup light (2 preferred)
  • Primary mask
  • 1 pair blade or jet style fins with spring straps - no split fins
  • Drysuit with 1 pocket on each thigh
  • 1 compass
  • 1 depth gauge/bottom timer
  • 1 Wet notes
  • 1 surface marker buoy (smb), pre-rigged with 100' spool
  • 1 cutting device

Tech 1 Equipment Requirements
  • SS or aluminum backplate with single piece 2" webbing harness and hardware
  • 1 back inflate style wing (no bungeed wings, no dual inflators)
  • 1 set of doubles cylinders with isolation manifold, DIN valves
  • Regulator set consisting of 2 first stages and:
            - 7' longhose regulator
            - 22-24" backup/necklace regulator hose
            - 24-26" hp/spg hose
            - lpi inflator appropriate to the wing's corrugated hose
  • 1 canister style HID or LED primary light
  • 2 backup lights (LED preferred)
  • Primary mask
  • 1 pair blade or jet style fins with spring straps - no split fins
  • Drysuit with 1 pocket on each thigh
  • 1 compass
  • 1 depth gauge/bottom timer
  • 1 Wet notes
  • 1 surface marker buoy (smb), pre-rigged with 100' spool
  • 1 cutting device
  • 1 al40 deco bottle w/ deco reg - 36" (swivel turret) or 40" (non-swivel turret) regulator hose & 6" spg hose
  • Separate drysuit inflator system
  • 1 primary mask and 1 backup mask
  • 1 side-handled primary reel - 400'


Tech 2 Equipment Requirements
  • SS or aluminum backplate with single piece 2" webbing harness and hardware
  • 1 back inflate style wing (no bungeed wings, no dual inflators)
  • 1 set of doubles cylinders with isolation manifold, DIN valves
  • Regulator set consisting of 2 first stages and:
            - 7' longhose regulator
         - 22-24" backup/necklace regulator hose
            - 24-26" hp/spg hose
            - lpi inflator appropriate to the wing's corrugated hose
  • 1 canister style HID or LED primary light
  • 2 backup lights (LED preferred)
  • Primary mask
  • 1 pair blade or jet style fins with spring straps - no split fins
  • Drysuit with 1 pocket on each thigh
  • 1 compass
  • 1 depth gauge/bottom timer
  • 1 Wet notes
  • 1 surface marker buoy (smb), pre-rigged with 100' spool
  • 1 cutting device
  • 1 al40 deco bottle w/ deco reg - 36" (swivel turret) or 40" (non-swivel turret) regulator hose & 6" spg hose
  • 1 al80 stage bottle w/ deco reg - 36" (swivel turret) or 40" (non-swivel turret) regulator hose & 6" spg hose
  • Separate drysuit inflator system
  • 1 primary mask and 1 backup mask
  • 1 side-handled primary reel - 400'

Trimix 1 Equipment Requirements
  • SS or aluminum backplate with single piece 2" webbing harness and hardware
  • 1 back inflate style wing (no bungeed wings, no dual inflators)
  • 1 set of doubles cylinders with isolation manifold, DIN valves
  • Regulator set consisting of 2 first stages and:
           - 7' longhose regulator
           - 22-24" backup/necklace regulator hose
           - 24-26" hp/spg hose
           - lpi inflator appropriate to the wing's corrugated hose
  • 1 canister style HID or LED primary light
  • 2 backup lights (LED preferred)
  • Primary mask
  • 1 pair blade or jet style fins with spring straps - no split fins
  • Drysuit with 1 pocket on each thigh
  • 1 compass
  • 1 depth gauge/bottom timer
  • 1 Wet notes
  • 1 surface marker buoy (smb), pre-rigged with 100' spool
  • 1 cutting device
  • 2 al40 deco bottles w/ deco reg - 36" (swivel turret) or 40" (non-swivel turret) regulator hose & 6" spg hose
  • Separate drysuit inflator system
  • 1 primary mask and 1 backup mask
  • 1 side-handled primary reel - 400'
  • Stage/deco bottle leash

Overhead Protocols Equipment Requirements
  • SS or aluminum backplate with single piece 2" webbing harness and hardware
  • 1 back inflate style wing (no bungeed wings, no dual inflators)
  • 1 set of doubles cylinders with isolation manifold, DIN valves
  • Regulator set consisting of 2 first stages and:
            - 7' longhose regulato
            - 22-24" backup/necklace regulator hose
            - 24-26" hp/spg hose
            - lpi inflator appropriate to the wing's corrugated hose
  • 1 canister style HID or LED primary light
  • 2 backup lights (LED preferred)
  • 1 primary mask and 1 backup mask
  • 1 pair blade or jet style fins with spring straps - no split fins
  • Drysuit with 1 pocket on each thigh
  • 1 compass
  • 1 depth gauge/bottom timer
  • 1 Wet notes
  • 1 cutting device
  • 1 primary mask and 1 backup mask
  • 1 side-handled primary reel - 400'
  • 2 backup lights
  • 2 75-100' spools

    Copyright © 2005-2013 Frog Kick Diving.  All Rights Reserved  

    Website Builder